How to condition and waterproof with MooBuzz®

Old boots that we can help you keep forever

Before you apply MooBuzz…

Make sure your leather is clean and dry.  See our Blog Post:  “Condition and Waterproof to Make your Leather Boots and Shoes Last Forever”  for instructions on how to clean your shoes and boots.

Rubbing anything into the grit of dirty leather is just like rubbing your leather with sandpaper.

Not. Good.

how to clean boot graphic

Best Practice!
Before MooBuzzing, remove laces and gently brush dirt & grit from your leather shoes or boots.

Once your leather is dry and free of grit…

Apply MooBuzz using your hands or a soft cloth.

If you have sensitive skin you may want to use latex or nitrile gloves. In fact, just wearing gloves works great and more MooBuzz gets directly into your leather instead of being absorbed by your skin or a cloth.

Whether you use your hands, gloves, or a cloth, massage MooBuzz into the leather using a circular motion. The warmth of your hands and the friction of rubbing will melt the oil and wax mixture and help it move into the leather.

Less is more here:

New boots need waterproofing - apply in circular motion

Best Practice!
Massage MooBuzz into your leather using a circular motion.

You are not frosting a cake. Several thin coats are better than one thick coat.

(We mention this because some of our loved ones treat MooBuzzing like frosting a cake.  It just wastes precious MooBuzz. )

Buzzed.

Allow MooBuzz to absorb into the leather for at least 20 minutes.

Wipe off any excess.

Give your leather a final buffing with a clean, soft cloth for a beautiful hand-rubbed look.

Love your leather. Show it off.